ARCHER 'Marine Plywood' I.S : 710

Archer Marine Plywood IS : 710 is a plywood of high degree of strength which can withstand vigorous conditions of changes in humidity & temperature. The plywood is given permanent preservative treatment by a pressure impregnation plant with a minimum retention of 12 kg/m.

The Research & Development set up in factory controls and tests the quality at every stage and ensures that only quality material is offered in the market.

Salient Features

	Used in ship building and repairs of old ships.
	Making of boats, yatch, life boats.
	Used in platforms of oil-excavation wells.
	In making of high quality of furniture, kitchen, pre-fabricated houses, cabins, etc.

Standard Thickness (mm) - 4, 6, 9, 12, 16, 19

Standard Size	8X4 ( 2.44 X 1.22 mm)
	8X3 ( 2.44 X 0.92 mm)
	7X4 ( 2.14 X 1.22 mm)
	7X3 ( 2.14 X 0.92 mm)
	6X4 ( 1.84 X 1.22 mm)
	6X3 ( 1.84 X 0.92 mm)

Technical ISI Specification IS : 710 Grade - BWP

	Test	Observed Value	Results
1	Moisture Content	6%	O.K.
2	Glue Sheer Strength (Dry State)	Indiv - 1440, 1450, 1380 N AV - 1410 N	Passed
3	Water Resistance Strength	Indiv - 1200, 1180, 1180 N AV- 1186 N	Passed
4	Mycological Test	Indiv - 1150, 1250, 1100 N AV - 1166 N	Passed
5	Water Resistance	No any delamination	O.K.
6  i)    ii)	Edge Straightness Squareness	Less than 0.2% Less than 0.2%	O.K. O.K.
7	Retention of Preservative	2.7 K.g./Sq. Mtr.	O.K.
8	Tensile Strength	Parallel to grain 455 K.g/ Perpendicular - 395 K.g/ Sum - 850 K.g	O.K.