MONARCH
'Concrete Shuttering Plywood
Monarch
Shuttering Plywood is manufactured as per IS : 4990/
1993 specification and is manufactured with selected
hardwood and treated with preservatives. Shuttering
plywood is highly durable and can stand against load
and vibrations applied during the work.
The
plywood is manufactured to withstand from marine organisms,
fungus and insects of borer and has greater tensile
strength and much more flexibility in bending in any
shape.
Salient
Features
 |
Applied
vacuum impregnation process as per IS : 5539
- 1939.
|
|
Maximum
used on either side because of higher face thickness
used.
|
|
Excellent
workability in both dry and wet conditions.
|
|
Treated
with high preservatives.
|
Standard
Thickness (mm) - 6, 9, 12, 16, 19, 25.
Standard
Size (ft) - 8X4, 8X3, 7X4, 7X3, 6X4, 6X3.
Application
-
Concrete work in buildings, bridges, tunnels fly-over
etc.
TECHNICAL
SPECIFICATION CONCRETE
SHUTTERING PLYWOOD
| Strength
& properties of Monarch Con Shuttering Plywood |
Thickness
|
| Parallel
to face grain |
750
|
650
|
600
|
600
|
600
|
600
|
| Perpendicular
to face grain |
350
|
450
|
500
|
100
|
500
|
300
|
| Tensile
strength (kg/cm2)Parallel
to face grain |
500
|
425
|
400
|
375
|
375
|
375
|
| Perpendicular
to face grainSpecific Gravity: 0.68 gms/cc |
250
|
325
|
350
|
350
|
375
|
375
|
Bending
Radii
The
following are the minimum bending radii of Monarch
Concrete Shuttering Plywood when dry:
| Thickness |
Across
the grain of
the outer piles
|
Parallel
with the
grain of outer piles.
|
| 12
mm (1/2") |
90
cm
|
125
cm
|
MONARCH CONCRETE SHUTTERING PLYWOOD IS ALSO AVAILABLE
IN FILM FACED PLYWOOD FORM ALSO.
